TAT1M2

TAT1M2

Each LFT1M2 unit is configured as a stand-alone unit, allowing you to choose the one that best suits your environment. *The air supply and the tonearm attachment required to use this product are sold separately.

Turntable TAT1M2

The platter material has been changed from stainless steel to brass, following the previous model's housing design of granite base, air float, and servo-less. With this change, even open-circuit type cartridges (*) using air-core coils are not affected by magnetic flux leakage, creating a quiet and expressive sound.


(*) Due to the open magnetic circuit and the powerful neodymium magnet used to secure the output, even non-magnetic stainless steel is magnetized, affecting the pickup of audio signals.

motor.png

Heavy turntable

Equipped with granite base and brass platter, which suppresses micro vibrations. Since the platter and tonearm are floated on air layer absorbs even the slightest vibration; the 28 kgs platter is supported only by the pressure of the air (only a few hundred grams).

mdu.png

Non-servo motor drive

Servo noise is eliminated by open control. The platter is driven by a DC Brush-less motor and thread, and the platter rotates by inertia alone.

XFD.png

It uses a unique "XFD system" that provides to the motor a highly accurate voltage with no fluctuations, based on a crystal transmitter.

tat1_2arms.png

Available with two arms

Linear Arm AFU1-2 and your swing-arm can be used. Two arm configurations are also available by adding attachments.

*Linear Arm AFU1-2 and attachment are sold separately.

pou2.png

Silence air supply

The air supply is equipped with a highly reliable pump that is also used for medical equipment, and powerfully supplies the capacity required for the platter. The double-sealed sound leakage and vibration prevention system maintains sufficient silence even when installed in a listening room.

*Air Supply POU2 is sold separately.

Specification

Model TAT1M2
■ Turntable section
Material

[Base] JIS0 grade granite

[Platter] Brass

Dimensions

[Base] 358W×120H×358D mm

[Platter] φ344×43H mm

Weight

[Base] 40 kg

[Platter] 28 kg

■ Motor drive section
Motor Control

Quartz Oscillator, No-Feedback "XFD system"

Drive System Thread drive (Aramid)
Motor DC, Brush-less, Low-noise
Turntable Speeds 33⅓, 45 rpm
Rotation Precision ±0.3%
Wow/Flutter

0.2%/0.04% or less

Power Supply AC100/120/200/240 V, 50/60 Hz
Power Consumption 40 W
Dimensions 130Wx120Hx358D mm
Wight 8 kg

Accessories

Rhodium-plated AC cord, Drive thread, Air tube Φ6, Level

Sold Separately

Player Board LPB1, Air Supply POU2, Linear Arm AFU1-2, Base Plate BPL1

Swing Arm Attachment SAA1, Linear Arm Attachment LAA1

Warranty Period 5 years(Excluding consumables)
  • Requires Air Supply POU2 (Sold Separately)
  • Since the motor is not servo controlled, it takes time to reach a constant speed.
  • Due to the use of granite, the pattern and color tone of the stone may vary depending on the production lot.
  • Product appearance and specifications are subject to change without notice.
  • ■Dimensions

pagetop